Compressor

 

  • Gardner‐ Denver model: WAQ, capacity at 314 cfm at 40 psi discharge pressure.
  • The pneumatic unloader pilot valve will be installed, setting at requires pressure.
  • Detroit Diesel 4‐71N engine.
  • Air Starter
  • Engine with radiator cooled through power take off assy, air starter and lubricator.
  • Power Take off assy
  • Air receiver and fuel tank : Air receiver attach with safety relief valve. Fuel tank contents level gauge. Air receiver tested witness by third part.
  • Base frame : The equipment is mounted on a single custom built heavy duty skid constructed with H‐beam is a industrial skid , 4 each lifting pad welded at four corner at underneath of the skid. Lifting bracket, lifting eye safty loads test deliver with test cert.
  • Accessory parts : The check valve will be install after the air receiver.  Unloader valve will be set at 40psi. Discharge manifold will be install with 2″ x 3″ Weaco Butterfly valve.
  • Footprint: LENGTH 10’ / WIDTH 7’ 6” / HEIGHT 8’
  • Weights : 5,000